Endüstriyel Alanlarda Kullanılan Veri İletim Tekniklerinin Karşılaştırılması

Seyfettin VADI, Naki GULER, Ramazan BAYINDIR
2.862 1.254

Öz


Bu çalısmada, endüstriyel sistemlerde kullanılan veri iletim tekniklerinin karsılastırılması yapılarak amaca ve sisteme uygun iletisim tekniğinin belirlenmesi için göz önünde bulundurulması gereken hususlar belirtilmistir. Uluslararası standartlara göre belirlenmis ve yaygın olarak kullanılan veri iletim teknikleri hakkında bilgiler verilerek karsılastırılmaları yapılmıstır. Özellikle günümüzde hızla yaygınlasan kablosuz iletisim teknolojileri hakkında iletisim hızı, iletisim mesafesi ve çalısma frekansları gibi teknik bilgiler detaylandırılarak iletisim destekli sistemlerde seçim yapılması kolaylastırılmıstır. Verilen bilgiler ve yapılan karsılastırmalar, endüstriyel iletisime ihtiyaç duyan projeler için yol gösterici özellik tasımaktadır.

Anahtar Kelimeler: GPRS, RF, PLC, Bluetooth

 

ABSTRACT

 

In this study, the data transmission techniques used in industrial systems have compared and issues for determining appropriate communication technique that is suitable for the user’s aim and system must be considered is specified. Technical informations and comparisons about determined according to international standards and widely used data transmission techniques are given. Technical information such as transmission baud rate, distance and operating frequency about nowadays rapidly spreading wireless communication technology are given in details to make easier selection in communication supported systems. The informations presented and comparisons made provide guidance for the projects in need of industrial communication feature.

 

Key words: GPRS, RF, PLC, Bluetooth


Anahtar kelimeler


GPRS, RF, PLC, Bluetooth

Tam metin:

PDF

Referanslar


Kevin M. Middaugh, "A Comparison of Industrial Communications Networks", IEEE Transactions on Industry Applications, Vol. 29, No. 5.

Jean-Dominique Decotignie, "Ethernet-Based Real-Time and Industrial Communications",

Proceedings of the IEEE, Vol. 93, No. 6, 2005. Jimmy Kjellsson, Anne Elisabeth Vallestad, Richard Steigmann, and Dacfey Dzung, "Integration of aWireless I/O Interface for PROFIBUS and PROFINET for Factory Automation", IEEE Transactions on Industrial Electronics, Vol. 56, No. 10, 2009.

Volker Schuermann, Thorsten Mann, Aurel Buda, Joerg F. Wollert, "Integrating Bluetooth Localization into Existing TCP/IP Networks", IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009.

W. Hashim,S. Dzulkifly,N.A Abd Ghafar, A.F. Ismail, K. Abdullah, "Mobile Broadband Networks Performance Modeling Based on Experimental

Conference of Statistics in Science, Business, and Engineering (ICSSBE), pp:1-5, 2012.

Gerd Bumiller, Thilo Sauter, Gerhard Pratl, Albert Treytl, "Secure and Reliable Wide-Area Power-Line Communication for Soft-Real-Time Applications within REMPLI", International Symposium of Power Line Communications and Its Applications, pp:57-60, 2005.

Filipe Pacheco, Maksim Lobashov, Miguel Pinho,

communication stack for metering, SCADA and large-scale domotic applications", International Symposium of Power Line Communications and Its Applications, pp:61-65, 2005.

Yüksel, M.E., Zaim, A. H.,“Rfıd’nin Kablosuz İletişim Teknolojileri İle Etkileşimi”, Akademik Bilişim 2009 Harran Üniversitesi, Şanlıurfa, 11 - 13 Şubat 2009.

Lee, SS ; Kim, B ; Kim, JY .; Choi, S ; Kim, C.; An IEEE 802.15.4g SUN OFDM-Based RF CMOS Transceiver for Smart Grid and CEs", Ieee Internatıonal Conference On Consumer Electronıcs (ICCE), pp:520-521, 2013.

Kutlu, A., “Wireless Medium Access Control Protocols

Applications”, The University of Sussex School of Engineering, PhD Thesis, 124s, Brighton, England.

Mullner, R., Ball, C.F., Ivanov, K., Treml, F., Spring, G., “Quality of service in GPRS/EDGE mobile radio networks”, Vehicular Technology Conference, 2004. VTC 2004-Spring. 2004 IEEE 59th Volume 5, pp. 2507-2511, 2004.

Pribylov, V.P., Rezvan, I.I., “On the way to 3G networks: Microwave

Measurements,Identification,Applications,

MEMIA 2003. Proceedings of the 4th IEEE- Russia Conference, pp. 87-98,2003.

line [10] [11] for Time

İndustrial [12] [13] the GPRS/EDGE

concept”, Electronics: Moon, SE ; Choi, NJ ; Lee, HK ; Lee, J ; Yang, WS, "Semiconductor-Type MEMS Gas Sensor for

Applications", Etri Journal, Vol: 35, pp: 617- 624, 2013.

Olivo, J.; Carrara, S.; De Micheli, G., "A Study of Multi-Layer Spiral Inductors for Remote Powering of Implantable Sensors", Biomedical Circuits and Systems, IEEE Transactions, Vol:7, pp:536-547, 2013.

Shang, T ; Huang, FH ; Chen, J ; Liu, JW "A Security-enhanced Key Distribution Scheme for AODVjr

Networks", Chınese Journal of Electronıcs,Vol: 22, pp: 577-582. S.

Association/Re-association

Optimize Energy Consumption for Real-Time IEEE

Networks", Wireless Pers Communication, Vol:71, pp:3157–3183,2013.

Ken Masica, April 2007, Recommended Practices Guide For Securing Zigbee Wireless Networks

Environments, Lawrence Livermore National Laboratory.

Yu-Kai Chen, Yung-Chun Wu, Chau-Chung Song, and Yu-Syun Chen, "Design and Implementation of Energy Management System With Fuzzy Control for DC Microgrid Systems",

Electronics, Vol. 28, No. 4, 2013.

Bhatt, U ; Verma, HK, Kumar, A , "Automation and remote control of volumetric calibrator using RS485/MODBUS protocol", 2nd International Conference on Power, Control and Embedded Systems (ICPCES), 2012.

Niv Goldenberg, Avishai Wool, "Accurate modeling

detection in SCADA systems, international journal of critical in frastructure protection 6, 2013, pp:63-75.

B. Dutertre. Formal modeling and analysis of the

omputer Science Laboratory, SRI International, October 2006.

Zhang, P; Shen, MD; Design of Automatic Sorting System of Boxed Drugs Based on Profibus-DP, 3rd International Conference on Manufacturing

(ICMSE 2012), Vol: 468-471, pp:848-851.

Xia, LL, Qiu, C, Fu, ZL, Pan, XY, "A Novel Design

Interface Card for the Intelligent Instruments of Communication Field Network", IEEE International Conference on Automation and Logistics (ICAL), 2012, pp: 382-385.

Zhang, YS; Liu, MM; Zhao, FZ; "The Design and Implementation of PLC Monitoring System Based on OPC", International Conference on Mechatronics and Control Engineering (ICMCE 2012), Vol: 278-280, pp: 930-935.

Seno, L; Tramarin, F; Vitturi, S; "Performance of Industrial Communication Systems: Real Application Contexts", International Conference on Mechatronics and Control Engineering (ICMCE 2012), Vol:6, pp: 27-37.

He, JZ ; Zhao, ZX ; Zhong, ZN , "The Design and Application of PLC Master-slave Control System

Conference on Measurement, Instrumentation and Automation (ICMIA 2012), Vol: 241-244, pp:1908-1912.

Zhao, XM, "Realization of Serial Port Expansion

Conference on Frontiers of Manufacturing and Design Science (ICFMD 2012), Vol: 271-272, pp:1597-1601.

Emilio, MD; "USB and RS232 in Data Acquisition System Design", Electronıcs World, Vol: 118, Issue:1916, pp:42-43, 2012.